If your lowering trailer is not raising up, take these steps for electrical fault finding.
Please follow the wiring fault-finding guide here.
It's possible the proximity sensor circuit could be at fault. Either the wiring to the sensor or the sensor itself. Working through the fault-finding flowchart step-by-step is the way to verify this.
If the sensor is found to be the fault and you need to bridge the sensor control wiring Follow this guide to bridge the sensor wiring.
Please be very careful when nearing the top raising the trailer with the sensor bridged, as the winch will not auto-stop and this could cause damage if the winch is not stopped manually at the correct moment by releasing the up button or switch.
Contact Futura After Sales Support
USA/CAN: (855)-744-3877
NZ/AUS: +64 9-415-2563
Contact us by emailing trailers@futuratrailers.com
USA/CAN: (855)-744-3877
NZ/AUS: +64 9-415-2563
Contact us by emailing trailers@futuratrailers.com