This document will guide you in pairing a new remote handset with your lowering trailer SmartControl.
Click here for printable PDF instructions. Pairing SmartControl Remote.
SmartControl Remote Pairing Procedure
- Activate the SmartControl remote by pressing and holding the two top buttons for approximately 3 seconds.
- Switch OFF the winch 12V Master switch on the SmartControl box.
- On the SmartControl box, simultaneously press and hold the Lift Winch switch UP and the Recovery Winch switch IN.
- Turn ON the winch 12V Master switch.
- Maintain the hold on the winch switches for approximately 6 seconds until a beeping sound commences.
- Within 10 seconds of the beeping initiation, press any button on the remote.
The pairing will conclude successfully upon cessation of the beeping or if the pairing mode times out after 10 seconds.
